Twitter

Online

Wednesday, May 21, 2014

Download-install and Update Samsung Galaxy ACE 2 with Kitkat 4.4.2 Firmware

cyanogenmod-logo-11 
Note: This update is the custom ROM firmware and not the official firmware from Samsung released.

Quick Pre-requisites:

      All data in your Samsung Galaxy ACE 2 must be secured using the steps mentioned below and not with the Samsung KIES, so as to ensure that the data be restored manually.
Go to the path "Settings> Applications> Development> USB Debugging" on your Samsung Galaxy ACE 2 to enable the USB debugging mode. Could charge batteries in the left device must have a minimum of 60% or other device to be getting off in the middle of firmware update.

      Since this is the custom ROM firmware, you must ensure that your phone is rooted. Download "Root Checker" app. Just in case, if the device is not rooted, it is imperative that the root of the device. You must also ensure that you are not under the backup using the ROM Manager app.
 Update process for Galaxy ACE 2 with Android 4.4.2 firmware Kitkat :

    
Cyanogen Mod 11 Download firmware package and Google Apps Package from here to your computer. Once downloaded, you must have the same in your device to place the .
    
Turn on the device so that it can be entered into the recovery mode .

    
Press and hold Home + Power + Volume Up button to turn the device into recovery mode. If your Galaxy ACE 2 is in the normal mode , then you need to try again , the process of entering the device is in Recovery Mode . You can also enter the device in recovery mode by using the ROM Manager app.

    
In recovery mode , select Clear data "and" to delete Wipe cache " the data and wipe the phone available in your cache.

    
Once the data is deleted , select "install zip from SD card " and select the firmware ZIP file that you have provided in the device and then followed by the Google Apps package then . It will take about 4 to 5 minutes, until both of the zip files on the device.

    
Once done , select "Back" and select the " Restart in normal mode " option for a device restart normally. Please note that it can sometime take longer than 3 -4 minutes to restart the device to normal mode .

    
If you are getting all the force close error , restart the device back into recovery mode and then clear the cache and wipe the data , start the unit in the normal mode.

    
Go to the path " Settings> Phone " to know the firmware version , the details are mentioned as KITKAT 4.4.2 .Note: If all Galaxy ACE 2 gets in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.Please let us know just in case if you ask any questions in the comments section . Alternatively, we will also come out with the custom ROM firmwares that will ensure that you make the most of it .

0 yorum:

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | belt buckles
Design Downloaded from Free Blogger Templates | Free Website Templates