Root Galaxy Note Pro 12.2 (3G) SM-P901 on Kitkat 4.4.2 Firmware

Procedure to Root Galaxy Note Pro 12.2 (3G) SM-P901:

• Download CF Root for your Galaxy Note Pro and Odin from here to your computer. Once downloaded, you now need to enter your Galaxy Note Pro 12.2 (3G) SM-P901 in download mode.

• Turn off your Galaxy Note Pro 12.2 (3G) SM-P901 and after 5 seconds or when your device gives a small vibration, hold the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device to see the Green Robot on the screen.

• Connect your device in Download mode with the computer in which you have opened the Odin. In Odin you will see that the ID:COM section will turn yellow indicating that all the drivers are installed successfully. If the drivers are not installed, you need to re install the same from official Samsung’s website.

• Once done, click on “AP” to choose the CF Root Package and click on “Start” to start the process of rooting. It will take around a minute for rooting the device. In some cases it may taken even longer time than expected. Once rooted, the device will be rebooted on its own and then it will install all the apps again.

• Download the “Root Checker” app from the Google PLAY Store to check on whether the device is rooted or not. Just in case if the device is not rooted, you need to retry the process of rooting by following the above instructions from the start.

Tip: Since rooting voids warranty, if you need to get back the lost warranty, you need to update the device with the stock firmware again.
Note: Just in case if your Galaxy Note Pro 12.2 (3G) SM-P901 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
So there you go, you have now successfully rooted your Galaxy Note Pro 12.2 (3G) SM-P901. Do let us know in the comments section just in case if you come across any issue.