Twitter

Online

Tuesday, January 22, 2013

Download and install Update Galaxy S Advance I9070 with Official Jellybean 4.1.2 XXLPY Firmware

Galaxy S Advance logo 
Procedure to Update Galaxy S Advance I9070 with Jellybean 4.1.2 Firmware:
  • Download Jellybean 4.1.2 Firmware Package and Odin from here to your computer. Once downloaded, connect your device to the computer and extract both the zip files downloaded in your computer.
  • Open Odin in your computer and you will see that the ID: COM section will turn Yellow indicating that all the drivers are installed successfully.
  • Now, click on “PDA” to select the tar file which you have got after extraction and click on “Start” to start the process of firmware update. As soon as the firmware is updated successfully, you will see that the device will be rebooted automatically. The whole process of firmware update will take around 4 -5 minutes.
  • Once you see the Welcome screen in your Galaxy S Advance I9070, you will now need to disconnect the device from the computer and use it the way you want to. To check whether the firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where the firmware version will be mentioned as XXLPY Jellybean 4.1.2 version.
Note: If the device gets stuck in the Samsung logo or gets into the boot loop mode then you need to long press the power button and turn off the device. Repeat the process from the start by following the instructions.

So there you go, you have now successfully updated your Galaxy S Advance I9070 device with the latest version of Jellybean 4.1.2 firmware. Do let us know just in case if you face any issues while you perform the update in the comments section below as we will try our level best to sort out the same.

0 yorum:

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | belt buckles
Design Downloaded from Free Blogger Templates | Free Website Templates