Online

Thursday, February 14, 2013

opera mini 7 (full touch) qwerty for samsung java phones

It seems that the content of this topic is suitable for:
Samsung , Star, Samsung GT-S3650 Corby.
Please note that we can not manually check the work on all phones. If something is not working, and the phone is on the list of suitable write a comment about this.

Assassins creed 3 (java game) samsung star

After years of endless quarrels and conflicts, the 13 American colonies, finally united in the quest for independence. In this era of a hero, and his journey begins on the ashes left over from the native population. Connor, a native of the Mohawk tribe, fighting for freedom and justice! At his disposal a large arsenal, which includes the famous tomahawk blade assassin. Ahead of an exciting adventure, traveling in an old Boston and New York, as well as large-scale naval battles.
Features:

Action-packed story that takes place during the American Revolution.
Connor - a Native American tribe that had been slaughtered.
A variety of fighting techniques and spectacular fights
A full arsenal of a tomahawk and a famous assassin's blade.
Combining elements of a side-scroller, action and thrilling chases.
9 game levels and massive naval battles. 

Plants vs. Zombies (java game)

 
 
 Battle 26 types of zombies with 49 zombie-zapping plants! The PC version features 50 Adventure levels, 20 Mini-Games, Puzzle and Survival modes, and the zombie-free Zen Garden. And don't miss all 20 new achievements and the interactive Zombatar™ — make a zombie of your very own!

Angry Birds for samsung star S5230 (java)

You guys know everything about this game
Only she proposes well norms.
Angry Birds for samsung star S5230 (java)

Download and install Update Galaxy ACE 2 I8160 with Official Jellybean 4.1.2 XXMB2 Firmware

ACEJB_1 
Tutorial to Update Galaxy ACE 2 I8160 with Jellybean 4.1.2 XXMB2 Firmware:
  • Now, all you need to do is to just turn off your Galaxy ACE 2 so that it can be entered in the Download mode. Download mode in Galaxy ACE 2 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.
  • Open Odin in your computer and connect your Galaxy ACE 2 smartphone with the computer using the original USB cable. In Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.
  • In Odin, click respective tabs to choose the corresponding files. Ignore the .dll file.
In-PIT select the file GT-I8160_EUR_XX_4G.pit
In-PDA select the file CODE_I8160XXMB2_932015_REV00_user_low_noship.tar
In-CSC select the file CSC_OXA_I8160OXAMB2_932015_REV00_user_low_noship.tar
  • Once selected, click on “Start” for starting the process of firmware update. As soon as the firmware update process is completed, you will see that the device will be rebooted automatically.
  • Till you see the Language selection / Country Selector option, don’t disconnect the device from computer. It may take longer time than expected for the device to reboot as it’s the first reboot after the upgrade.
  • To check whether the firmware has been updated to the latest version or not, head over to the path “Settings > About Phone” where you will get to see the firmware version as “Jellybean 4.1.2 XXMB2” firmware version.
 Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
XXMB2 Jellybean 4.1.2 Firmware has been successfully installed in your phone. Do let us know in the comments section just in case if you have any issues in the process of firmware update.

Download and install Update Galaxy Nexus I9250 with Official Jellybean 4.2.2 JDQ39 Build Firmware

Galaxy Nexus Jelly Bean 
Procedure to Update Galaxy NEXUS I9250 with Android 4.2.2 JDQ39 JellyBean firmware:
  • First you will need to have the Active Wi Fi Connection in your device. Turn ON the Wi Fi and head over to the path “Settings > About Phone > Software Updates” to check on whether there are any software updates available or not. Just in case if no update is found, then you can apply this firmware update manually.
  • You can enter your device in the Recovery Mode from the ROM Manager app as well. Galaxy Nexus I9250 can be entered in the recovery mode manually by pressing and holding the Volume Up + Volume Down and then press the Power button to enter the device in the recovery mode.
  • In recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” to select the “Jellybean 4.2.1 Firmware Package” which you have placed in your device and with the help of Volume buttons and Power button, select the same. It will take around 3 – 4 minutes for applying this update. once the device is updated, you will see the message as “Install from sd card completed” and then select “reboot system now” for rebooting the device.
Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.
Do let us know in the comments section just in case if you come across any issues as we will try our level best to sort out the same. So, there you go you have now successfully updated your Galaxy Nexus smartphone with the latest Jellybean 4.1.2 firmware.

Download - Root Galaxy S Advance on XXLQ4 Jellybean 4.1.2 Firmware

Galaxy S Advance logo 
Procedure to Root Galaxy S Advance I9070 on XXLQ4 Firmware:
  • Download Rooting Package for Galaxy S Advance from here to your computer. Once downloaded, connect your phone to computer with the help of original USB cable and then place the Root.Zip file in your device’s external SD Card.
  • Now, disconnect the device and then turn Off your phone so that it can be entered in the Recovery mode. Recovery mode in Samsung Galaxy S Advance I9070 can be entered by pressing Volume Up Key + OK button, and holding both simultaneously press the Power Button. In recovery mode, select “clear cache” and “wipe data / factory reset” so that all the data will get cleared from the device.
  • In recovery mode select “install from zip card” and select the “root.zip” file for rooting the device. It will take around 3 -4 minutes for rooting the device. Once the device is rooted, the phone will be rebooted.
  • Now, once the device gets rebooted you need to download the “Root Checker” app from the Google PLAY Store and then check on whether the device is rooted or not. Just in case if the device is not rooted you will have to try the process again.
Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.
So, there you go, you have successfully rooted your device on the XXLQ4 Jellybean firmware of 4.1.2 version. Do let us know in the comments section just in case if you come across any issues as we will try our level best to sort out the same.

Download and install Update Galaxy S Advance I9070 with Official Jellybean 4.1.2 XXLQ4 Firmware

Jellybean 4.1 Logo 
Procedure to Update Galaxy S Advance with Jellybean 4.1.2 XXLQ4 Firmware Update:
  • Download the Jellybean 4.1.2 XXLQ4 Firmware Package and Odin from here to your computer and then extract the same preferably to a folder on desktop. Now, open odin in your computer and then turn off your phone so that it can be entered in the Download Mode.
  • Turn Off your device so that it can be entered in the Download Mode.
  • Download mode in Samsung Galaxy S Advance I9070 can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. In recovery mode, select “clear cache” and “wipe data / factory reset” so that all the data will get cleared from the device.
  • Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM section will turn yellow indicating that all the drivers have been installed.
  • Click on “PDA” to select the tar file which you got upon extraction of firmware package. Now, click on “Start” to start the process of firmware update. As soon as the firmware is updated successfully, the device will be rebooted. Please note that whole process of firmware update will take around 4 -5 minutes for applying this update. Don’t pull Off the battery in the process of firmware update.
  • To check on whether the firmware is updated or not, you will need to go to the path “Settings > About Phone” where the current firmware version will be mentioned as Jellybean XXLQ4 4.1.2 firmware.
Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.
Do let us know in the comments section just in case if you come across any issues as we will try our level best to sort out the same. So, there you go you have now successfully updated your Samsung Galaxy S Advance I9070 smartphone with the latest Jellybean 4.1.2 firmware.

Saturday, February 9, 2013

Download and install Update Galaxy S2 GT I9100G with Jellybean 4.1.2 XWLSR Firmware

Screenshot_2013-01-23-04-17-07 Screenshot_2013-01-23-04-21-02 
Tutorial to Update Galaxy S2 GT I9100 with Jellybean 4.1.2 XWLSR Firmware:
  • Download Jellybean 4.1.2 XWLSR Firmware and Odin from here to your computer. Once downloaded, extract both the files preferably to the desktop to a folder. Now, open Odin in your computer.
  • Turn Off your Galaxy S2 GT I9100G smartphone so that it can be entered in the Download Mode. Download mode in Galaxy S II GT I9100G can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.
  • Open Odin in your computer and connect your Galaxy S2 I9100G smartphone with the computer using the original USB cable. In Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.
  • In Odin, click on “PDA” and select the .tar file which you get after the extraction of the firmware zip file. Ignore the .dll file.
  • Now, once you have selected the tar file in the PDA Section, click on “Start” to start the process of firmware update process.
  • Once the firmware is updated, your Galaxy S2 GT I9100G smartphone will be restarting automatically. Now, all you need to do is to just ensure that you are not disconnecting the device till you see the country selector / home screen in your device.
  • To check whether the firmware has been updated to the latest version or not, head over to the path “Settings > About Phone” where you will get to see the firmware version as “Jellybean 4.1.2” firmware version.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
So there you go, you have now successfully learnt on how to update your device with the latest version of Jellybean 4.1.2 firmware. Do let us know in the comments section just in case if you face any issues.

Download and install Update Galaxy S2 GT I9100 with Official Jellybean 4.1.2 XWLSD Firmware

Galaxy S2 Logo 
Tutorial to Update Galaxy S2 GT I9100 with Jellybean 4.1.2 XWLSD Firmware:
  • Now, all you need to do is to just turn off your Galaxy SII so that it can be entered in the Download mode. Download mode in Galaxy S II GT I9100 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.
  • Open Odin in your computer and connect your Galaxy S2 smartphone with the computer using the original USB cable. In Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.
  • In Odin, click on “PDA” and select the .tar file which you get after the extraction of the firmware zip file. Ignore the .dll file.
  • Once selected, click on “Start” for starting the process of firmware update. As soon as the firmware update process is completed, you will see that the device will be rebooted automatically.
  • Till you see the Language selection / Country Selector option, don’t disconnect the device from computer. It may take longer time than expected for the device to reboot as it’s the first reboot after the upgrade.
  • To check whether the firmware has been updated to the latest version or not, head over to the path “Settings > About Phone” where you will get to see the firmware version as “Jellybean 4.1.2” firmware version.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
So, there you go, you have now successfully learnt on how to apply the latest XWLSD Jellybean 4.1.2 Firmware in your device. Do keep us posted in the comments section just in case if you face any issues as we will try to address the same as soon as possible.

Wednesday, February 6, 2013

Download and install Update Galaxy ACE S5830 with Jellybean 4.1 Styled Revolution Custom ROM Firmware

Revolution 1 
Revolution 4
Procedure to Update Samsung Galaxy ACE S5830 with Revolution Light Custom ROM Firmware:
  • Download the Revolution Custom ROM Firmware package from here to your computer. Once downloaded connect your device to the computer with the help of original USB cable and place the downloaded zip file in the internal memory of your device.
  • Now, disconnect the device from computer and download the ROM Manager app from the Google PLAY Store. Open ROM Manager app and select the option of “FLASH Clock Work mod Recovery” so that the custom recovery image is flashed. Up next select “Reboot in Recovery Mode” for entering the device in the recovery mode.
  • Once the device boots in the recovery mode, select “install zip from sd card” > “choose zip from sd card” and select the Revolution Light Custom ROM Firmware which you have placed in your device.
  • Please note that once the file is selected, it will take around 4 – 5 minutes for applying this update and once it’s placed, you will need to select “Go Back” and “reboot system now” for rebooting the device in the normal mode. It may take more than 6 – 7 minutes for booting the device sometimes, make sure that you are not interrupting while the device shows the Galaxy ACE Logo boot animation.
Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully learnt on how to update your Galaxy ACE S5830 with the latest Revolution Light Custom ROM Firmware.

Download and install Update alaxy Note 2 N7100 with Official Jellybean 4.1.2 XXDMA6 Firmware

Galaxy NOTE 2 Logo 
Procedure to update Galaxy Note II N7100 with XXDMA6 Jellybean 4.1.2 Firmware:
  • Turn Off the device so that it can be entered in the Download Mode. Download mode in Galaxy Note N7100 can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. Now, a Warning message will be shown when you need to press the Volume Up key to continue entering the Download Mode.
  • In download mode, connect your device to the computer with the help of original USB cable and then you will see that the ID: COM section will turn Yellow indicating that all the drivers have been installed.
  • Click on “PDA” to select “TAR File” which you got after extracting the firmware file and then click on “Start” to start the process of firmware update. As soon as the firmware is updated successfully, the device will be rebooted automatically indicating that the firmware has been updated successfully.
Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.
Do let us know in the comments section just in case if you come across any issues as we will try our level best to sort out the same. So, there you go you have now successfully updated your Samsung GALAXY Note 2 N7100 smartphone with the latest Jellybean 4.1.2 firmware.

Monday, February 4, 2013

Download and install Update Galaxy S3 Mini I8190 with Official Jellybean 4.1.2 DXALL7 Firmware

GALAXY-S3-Mini-iMAGE 
Procedure to Update Galaxy S3 Mini I8190 with Jellybean 4.1.2 DXALL7 firmware:
  • Now, turn off the device so that it can be entered in the Download Mode.  The download mode in Galaxy S3 Mini I8190 can be entered by pressing  Volume Down Key + OK button, and holding both simultaneously press the Power Button. Now, a Warning message will be shown when you need to press the Volume Up key to continue entering the Download Mode.
  • Once the download mode is entered, you will have to Open Odin in your computer. Connect your device to the computer with the help of original USB cable and then all you need to do is to just ensure that the ID : COM section has turned yellow /Blue depending upon your Odin version. If the ID: COM section doesn’t turn Yellow / Blue, you will need to re install the drivers / KIES tool in your computer.
  • Once the ID: COM section turns yellow / blue, you will have to click on “PDA” to select “” and then click on “Start” tab in Odin for starting the process of firmware update. As soon as the update is applied successfully, you will see that the device will be rebooted.
  • Once you see the home screen or the country selector code, you will need to disconnect the device from computer and check whether the firmware has been updated or not. To check, navigate to the path “Settings > About Phone” where you will get to see the Firmware version as Jellybean 4.1.2 DXALL7.
Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.
Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Saturday, February 2, 2013

Download and install Manual Update Galaxy Note N7000 with Official Jellybean 4.1.2 XXLSA Firmware

XXLSA7 
Procedure to Update Galaxy Note N7000 with Jellybean 4.1.2 XXLSA Firmware:
  • Download XXLSA Jellybean 4.1.2 Firmware Package from here to your computer along with Odin in your computer. Once downloaded extract both of them preferably to the folders on Desktop. Once extracted, open odin in your computer and turn off your Galaxy Note so that it can be entered in the Download Mode.
  • The download mode can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. Just in case if the device turns ON in the normal mode, you will have to again retry entering the device in the download mode.
  • Connect your phone to computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow which will mean that all the drivers have been installed successfully and you are ready to proceed to the next step wherein you will have to click on the below mentioned corresponding tabs to select the file from extracted firmware package.
PDA – CODE_N7000XXLSA_549786_REV02_user_low_ship.tar.md5,
Phone – MODEM_N7000XXLSA_REV_05_CL1222228.tar.md5,
CSC – CSC_OXA_N7000OXALSA_549786_REV02_user_low_ship.tar .md5
  • Make sure that Re-Partition option is unticked and nothing should be added in the PIT section. Once you are done with all the above mentioned selections, you can now head over to the next step wherein you need to click on “Start” to start the process of firmware update.
  • It will take around 3 -4 minutes for applying the firmware, once the firmware is updated successfully you will see that device will be rebooting on its own.
  • To check on whether the firmware is updated or not, head over to the path “Settings > About Phone” for checking the same where you will see the version details as XXLSA Jellybean 4.1.2 firmware.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install Update Galaxy Nexus I9250 with Jellybean 4.2.1 Firmware

XXLH1 
Procedure to Update Galaxy Nexus I9250 with Jellybean 4.2.1 Firmware Update:
  • Download Jellybean 4.2.1 Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your device.
  • Disconnect the device and download the ROM Manager app from the PLAY Store. Just in case if you are unable to enter the device in the Recovery Mode, you will need to enter the device in the recovery mode manually with the help of below mentioned step.
  • Galaxy Nexus I9250 can be entered in the recovery mode manually by pressing and holding the Volume Up + Volume Down and then press the Power button to enter the device in the recovery mode.
  • In recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” to select the “Jellybean 4.2.1 Firmware Package” which you have placed in your device and with the help of Volume buttons and Power button, select the same.
  • Once the firmware is updated successfully, the device will read the message as “install from sd card completed”, now select “go back” and “reboot system now” for rebooting the device in the normal mode.
Note: If by any chance you come across with any issues related to phone not booting or device getting into the Boot Loop Mode, then you will need to re follow the above mentioned instructions to apply the update.
So, there you go you have now successfully applied the update of Jellybean 4.2.1 firmware. Do let us know in the comments section just in case if you face any issues.

Tuesday, January 29, 2013

Galaxy S Advance I9070 with Jellybean 4.1.1 Firmware

Galaxy S Advance logo 
Procedure to Update Galaxy S Advance I9070 with Jellybean 4.1 Styled Firmware:
  • Once placed, disconnect the device and download the ROM Manager app from the Google PLAY Store so that you can then enter the device in the recovery mode. Alternatively, you can also enter your phone in the recovery mode with the help of below mentioned manual step.
  • Recovery mode in Galaxy S Advance I9070 can be entered manually by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.
Note: If the device gets stuck in the Samsung logo or gets into the boot loop mode then you need to long press the power button and turn off the device. Repeat the process from the start by following the instructions.

So there you go, you have now successfully updated your Galaxy S Advance I9070 device with the latest version of Jellybean 4.1.1 Styled firmware. Do let us know just in case if you face any issues while you perform the update in the comments section below as we will try our level best to sort out the same.

Monday, January 28, 2013

Root Galaxy S2 I9100 on XWLS8 Jellybean 4.1.2 Firmware

Galaxy S2 Logo Special 
Procedure to Root Galaxy S II GT I9100 on Jellybean XWLS8 4.1.2 Firmware:
  • Turn Off your Galaxy S2 I9100 so that your device can be entered in the Download Mode. Download mode in Galaxy S2 GT I9100 can be entered in recovery mode by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.
  • Once the device is entered in the Download Mode, Open Odin in your computer and connect your device to the computer with the help of original USB cable and then you will see that the ID: COM section will turn Yellow indicating that all the drivers have been installed successfully.
  • Now, click on “PDA” and then you will have to select “”. Once selected, click on “Start” to start the process of Rooting.
  • Once the device is rooted, the device will be rooted. It will take around 1 -3 minutes for rooting the device. Once the device is rooted, phone will be rebooted.
Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.
  • Download the Root Checker app from the Google PLAY Store to check whether your device is rooted or not.  Also, if it’s rooted, you then will have to download and install the ROM Manager app from the Google PLAY Store.
So, there you go, you have successfully rooted your device on the XWLS8 Firmware which is on the Jellybean 4.1.2 firmware. Do let us know in the comments section just in case if you face any issues in the comments section.

Download and install Update Galaxy Note N8000 with Official Jellybean 4.1.2 XXCLL6 Firmware

Galaxy Note N8000 OTA 
 Procedure to Update XXCLL6 Jellybean 4.1.2 Firmware in Galaxy Note N8000:
  • Open Odin in your computer and turn Off your Galaxy Note N8000 10.1 device so that it can be entered in the download mode.
  • Hold Volume Down rocker key and holding this press the Power button till you see the Warning Screen. Now, on WARNING Screen you will have to press the Volume Up key to enter the device in the download mode.
  • Once your device gets in the download mode, connect your tablet to the computer with the help of original USB cable and then you shall see that in Odin the ID : COM section will turn Yellow indicating that all the drivers have been successfully installed.
  • Now, click on “PDA” tab in Odin and select the tar file which you got after extracting the firmware zip file. Once selected, you need to click on “Start” for starting the process of firmware update.
  • The whole process of firmware update may take about 3 -5 minutes. Once the firmware is update, your tablet will be rebooted automatically and once you see the home screen in your tablet, you can then disconnect the device from computer.
  • Now, to check whether the firmware is updated or not, head over to the path “Settings > About Tablet” where you will get to see the firmware version as jellybean 4.1.2 XXCLL6.
Users Facing Force Close Issues:
Turn Of your Galaxy Note N8000 to enter your device in the recovery mode. In the recovery mode select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now option.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
So, there you go, you have now successfully learnt on how to apply the latest Jellybean 4.1.2 firmware dubbed as XXCLL6 in your Galaxy Note N8000 10.1 Tablet. Do keep us posted in the comments section just in case if you face any issues as we will try to address the same as soon as possible.

Download and install Update Galaxy Grand I9082 with Official Jellybean 4.1.2 XXAMAB Firmware

Galaxy-Grand-Banner 

Procedure to Update Galaxy Grand I9082 with XXAMAB Jellybean 4.1.2 Firmware:
  • Now, open Odin in your computer and turn off your phone so that it can be entered in the Download Mode.
  • Download mode in Galaxy Grand I9082 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.
  • Open Odin in your computer. Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM Section will turn Yellow. Just in case if the odin refuses to turn Yellow, you will then have to install the required drivers by removing unknown drivers in USB section and reboot the system once. Preferably you can install the Samsung KIES to get rid of this issue from Samsung.com/KIES.
  • Now, open Odin in your computer and then click on “PDA” to select “” and then click on “start” to start the process of firmware update. As soon as the firmware is updated, the device will be rebooting and then once you see the home screen, you can remove the connected USB and follow the on screen instructions.
  • To check on whether the firmware has been successfully updated or not, head over to the path “Settings > About Phone” where the current firmware will be mentioned as Jellybean 4.1.2 XXAMAB. Very soon we will be coming out with an article which will help you root your Samsung Galaxy Grand device.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
So, there you go, you have now successfully learnt on how to apply the latest Jellybean 4.1.2 firmware dubbed as XXAMAB in your Galaxy Grand I9082 smartphone. Do keep us posted in the comments section just in case if you face any issues as we will try to address the same as soon as possible.

Download and install Update Galaxy Y GT-S5363 with Official Value Pack Gingerbread 2.3.6 Firmware

Samsung Galaxy Y Logo 

Procedure to Update Galaxy Y GT-S5363 with Value pack Gingerbread 2.3.6 Firmware:
  • Turn Off your Galaxy Y GT-S5363 so that it can be entered in the Download Mode. Download Mode in Galaxy Y GT-S5363 can be entered by pressing Volume Down + Menu Button + Power button till you see the Download Mode screen. Just in case if the device boots up in the normal mode, you will have to re try the process of entering the device in the Download Mode.
  • Now, in Odin you need to click on “PDA” to select “S5363XXLL1_S5363NEELL1_S5363XXLL1_HOME.tar.md5” file from the extracted firmware zip file and once it’s done, click on “Start” the process of firmware update. As soon as the firmware is updated successfully, the Galaxy Y GT-S5363 will be rebooted.
  • Once you see the Welcome screen in your Galaxy Y GT-S5363, you will now need to disconnect the device from the computer and use it the way you want to. To check whether the firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where the firmware version will be mentioned as XXLL1 Gingerbread Value Pack Firmware.
Tip: Just in a rare case if the device doesn’t boot up or gets into the continuous Boot loop mode, you need to reinsert the battery and boot the device normally. Or else you need to re-apply the update by following the steps above.

Download and install Update Galaxy S GT I9000 with Stable Jellybean 4.2.1 C-RoM Mix v5.0 Firmware

Procedure to Update Samsung Galaxy S GT I9000 with C-RoM Mix v5.0 Jellybean 4.2.1 firmware:
  • Download the C-RoM Mix 4.2.1 firmware package from here to your computer. Once downloaded, connect your Galaxy S GT I9000 to the computer with the help of original USB cable and place the zip file into the sd card. Ensure that you are not placing the files deep into the sub folders.
  • Recovery mode in Galaxy S GT I9000 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.
  • Now, in the recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the C-RoM Mix v5.0 firmware  Package. It will take around 4 -5 minutes for applying the update.
  • Once you see the “install from sd card complete” message on screen, select “Go Back” and select “reboot system now” for rebooting the device in the normal mode.
  • To check on whether the C-RoM Mix v5.0 firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where you will find the firmware version.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully learnt to update your Galaxy S with C-RoM Mix v5.0 firmware, in the coming days to come we will come with new custom Jellybean 4.2 firmwares for Galaxy S devices.
forum.xda

Wednesday, January 23, 2013

Download and install Update Galaxy S2 GT I9100 with Android 4.1.2 Jelly Bean Firmware

 
[OFFICIAL]Samsung rolls out Android 4.1.2 Jelly Bean update for the Galaxy S II GT-I9100

Samsung has just started to push Android 4.1.2 Jelly Bean update to the International Samsung Galaxy S II GT-I9100. The Galaxy S II is the best-selling Android device of 2011 and has a very large user base that’s why Samsung keeps on updating this device with all the new Android versions as they want to provide the Galaxy S II users with their best support experience.

You might not be able to update your device to Android 4.1.2 Jelly Bean right away as the update is rolling out in phases. So, it might not yet be available for your country or network provider (If Your device is Carrier branded) but don’t worry the update will arrive soon.

In the history of software updates, the new Jelly Bean update by Samsung to the Galaxy S II is by far the most major update given to a smartphone yet. As we all know Samsung’s ICS update didn’t had any UI changes and had exactly the same UI which was in its Gingerbread but this is not the case with Samsung’s Android 4.1.2 Jelly Bean update. The new jelly bean update breathes a new life into the Galaxy S II, Samsung has completely ditched the old UI and has given the new Nature UX Interface, which is the same as the one being used in the Galaxy S III Mini and the Galaxy S III, in its latest Jelly Bean update.

Some of the Enhancements in the new Jelly Bean Update:
- Buttery Smooth Performance & Great Stability (Thanks to Project Butter)
- Full User Interface Revamp (Same UI as of the Galaxy S III and Galaxy Note II)
- TouchWiz Nature UX
- Samsung’s S Cloud services
- Improved Camera features
- New Lockscreen With Many Customization Options
- New Features like Direct Call, Smart Stay and Pop-up Play
- New Widgets (From Galaxy S III)
- 2 Home screen modes
- New Notification bar With More Notification Toggles
- Google Now

Keep an eye on @SamKiesUpdates to get the latest information on Official Firmware updates for your Samsung device.
You can update your Galaxy S II through Samsung KIES or by using OTA.

Hot links:
Check the 10 latest official firmwares for the Galaxy S II here!
You can find our live firmware feed here!

Official Firmware Details:
Android Version: 4.1.2 – Build JZO54K
PDA: I9100XWLS8
CSC: I9100FOPLS3
MODEM: I9100XXLS8
Changelist: 816988
Build Date: 14 January 2013

Live Feed of Official Android 4.1.2 Jelly Bean update availability for the Galaxy S II GT-I9100
XXLS / XWLS / ZSLS / DDLS / JVLS / JPLS
Download

Black iphone Theme for Samsung Corby 2 (smt)

CORBY 2 THEMES: Black iPhone Theme by Anonymous 
 Black iphone Theme for Samsung Corby 2 (smt)
 
This installation guide is for SAMSUNG Corby 2 user...
1.Click the Download button to get the .smt file   
2. Send .smt  file from your PC to your mobile via USB or Bluetooth   
3. Go to MENU > My Files > Themes > Tap the name of the theme (e.g.heroesofnewerth.smt) 
4. Tap Set and Exit and you're done.

Download and install Google Play Store APK v3.10.10

Google Play Store v3.7.15 
Grab the APK file of Google Play Store App v3.10.10 from here – Download Now.

Tuesday, January 22, 2013

Download and install Update Galaxy S2 GT I9100G with Jellybean 4.1.2 Firmware

avatar-rom 
Procedure to Update Galaxy S2 GT I9100G with Avatar ROM Jellybean 4.1.2 firmware:
  • Now, disconnect the device from computer and turn Off the device so that it can be entered in the recovery mode. The recovery mode can be entered either with the help of “ROM Manager” app or manually with the help of below mentioned step.
  • Recovery mode in your Galaxy Device can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. Now, select “install zip from SD Card” in the recovery mode to choose the zip file which you have placed in your device.
  • Now, once the firmware is updated, select “go back” and select “reboot system now”. To check on whether the firmware is updated or not, head over to the path “Settings > About Phone” for checking the same.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Download and install Update Galaxy S3 Mini I8190 with Official Jellybean 4.1.2 XXAMA2 Firmware

GALAXY-S3-Mini-iMAGE 
Procedure to Update Samsung Galaxy S3 Mini I8190 with Jellybean 4.1.2 XXAMA2:
  • Download the XXXAMA2 Jellybean 4.1.2 Firmware Package + Odin Package from here to your computer. Once downloaded, extract both of them and open Odin in your computer. You can download the appropriate Firmware Package mentioned below,
  • Turn Off your Galaxy S3 Mini I8190 so that it can be entered in the Download Mode. The download mode in Galaxy S3 Mini I8190 can be entered by pressing  Volume Down Key + OK button, and holding both simultaneously press the Power Button. Now, a Warning message will be shown when you need to press the Volume Up key to continue entering the Download Mode.
  • Now, all you need to do is to just connect your device to the computer with the help of original USB cable and then open the ID : COM section will turn Yellow indicating that all the drivers have been successfully installed.
  • Click on “PDA” to select the TAR File which is having “code” in the file name and the same you will get once you extract the Firmware Zip file which you have downloaded in the initial step.
  • Once the firmware update process is completed successfully, the phone will be rebooted automatically.
  • Disconnect the device from the computer and check from the path “Settings > About Phone” where the current firmware version will be mentioned as Jellybean 4.1.2 firmware XXAMA2. Very soon we will be coming up with an article which will help you to upgrade with the latest Jellybean 4.2.1 firmware version for Galaxy S3 Mini I8190.
Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.
Do let us know in the comments section just in case if you face any issues in the process of firmware update as we will try our level best to sort out the same at the earliest.

Download and install Update Galaxy S GT I9000 with Stable Jellybean 4.2.1 Firmware

Jellybean 4.1 Logo 
Procedure to Update Samsung Galaxy S GT I9000 with C-RoM Mix v5.0 Jellybean 4.2.1 firmware:
  • Download the C-RoM Mix 4.2.1 firmware package from here to your computer. Once downloaded, connect your Galaxy S GT I9000 to the computer with the help of original USB cable and place the zip file into the sd card. Ensure that you are not placing the files deep into the sub folders.
  • Recovery mode in Galaxy S GT I9000 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.
  • Now, in the recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the C-RoM Mix v5.0 firmware  Package. It will take around 4 -5 minutes for applying the update.
  • Once you see the “install from sd card complete” message on screen, select “Go Back” and select “reboot system now” for rebooting the device in the normal mode.
  • To check on whether the C-RoM Mix v5.0 firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where you will find the firmware version.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully learnt to update your Galaxy S with C-RoM Mix v5.0 firmware, in the coming days to come we will come with new custom Jellybean 4.2 firmwares for Galaxy S devices.

Download and install Update Galaxy S2 GT I9100 with Jellybean 4.1.2 Firmware

s2 

Procedure to Update Galaxy S2 GTI9100 with Jellybean 4.1.2 Firmware:
  • Download the latest Jellybean 4.1.2 Firmware Package from here to your computer. Once downloaded, connect your device to the computer and place the zip file in the internal memory of your S2.
  • Disconnect the device so that your phone can be entered in the recovery mode. The recovery mode in Galaxy S2 can be entered either by ROM Manager or with the help of below mentioned manual method which we have mentioned below.
  • Recovery mode in Galaxy S2 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. Now, select “install zip from SD Card” in the recovery mode to choose the zip file which you have placed in your device.
  • It will take around 3 -5 minutes for applying the update and as soon as it’s updated successfully, you will need to then make sure to follow all the on screen instructions. Once you see the message as “install from sd card completed”, select “go back” and select “reboot system now” for rebooting the device in the normal mode.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Once updated, you can now restore all the data which you have created a backup of all the data. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install Update Galaxy S3 I9305 with Official Jellybean 4.1.2 XXBMA3 Firmware

Galaxy S3 Hyderabad Logo 
Procedure to Update Galaxy S3 I9305 with XXBMA3 Jellybean 4.1.2 Firmware Update:
  • Turn Off your phone so that it can be entered in the download mode. Download mode in Galaxy S3 GT I9300 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which you will get to see a green robot indicating that the device has entered in the download mode.
  • Connect your phone in the download mode to the computer while keeping Odin opened. Once you connect, you will see that the ID: COM section will turn Yellow indicating that all the drivers have been successfully installed.
  • Click on “PDA” to select “TAR File” which you got after extracting the firmware file and then click on “Start” to start the process of firmware update. As soon as the firmware is updated successfully, the device will be rebooted automatically indicating that the firmware has been updated successfully.
  • Once you see the home screen, disconnect the device and head over to the path “Settings > About Phone” where you will be able to see the firmware version as Jellybean 4.1.2 firmware XXBMA3.
Tip: Just in a rare case if the device doesn’t boot up or gets into the continuous Boot loop mode, you need to reinsert the battery and boot the device normally. Or else you need to re-apply the update by following the steps above.

Download and Root Galaxy S3 GT I9305 on XXBMA3 Jellybean 4.1.2 Firmware

Samsung 
Procedure to Root Galaxy S3 GT I9305 on XXBMA3 Jellybean 4.1.2 Firmware:
  • Download XXBMA3 Jellybean 4.1.2 Firmware Package from here to your computer which contains Odin as well. Once downloaded, extract both of the files in your computer and open Odin in your computer.
  • Turn Off your device so that it can be entered in the Download Mode. Download mode in Galaxy S3 GT I9300 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which you will get to see a green robot indicating that the device has entered in the download mode.
  • Connect your phone in the download mode to the computer while keeping Odin opened. Once you connect, you will see that the ID: COM section will turn Yellow indicating that all the drivers have been successfully installed. Also, in Odin ensure that Auto Reboot and F. Reset Time checkboxes are selected and no other options are
  • Now, click on “PDA” to select “CF-Auto-Root-m3-m3zh-gti9305.tar.md5” and then click on “Start” to start the process of Rooting. Once the device is rooted, download the “ROOT CHECKER” app from the Google PLAY Store to check on whether the device is rooted or not. Just in case if the device is not rooted, you need to retry the process of rooting.
Tip: Just in a rare case if the device doesn’t boot up or gets into the continuous Boot loop mode, you need to reinsert the battery and boot the device normally. Or else you need to re-apply the update by following the steps above.
So there you go, you have now successfully rooted your Jellybean 4.1.2 XXBMA3 Firmware loaded Samsung Galaxy S3 I9305 smartphone. Do let us know in the comments section just in case if you face any issues so that we can assist you as soon as possible.

Download and install Update Galaxy ACE S5830 with S3 Looking TouchWiz 5.0 Firmware

Galaxy ACE Logo 
Screen Captures 7.2 
Procedure to Update Samsung Galaxy ACE S5830 with the latest Cyanogen MOD 7.2 Styled SGS 3 TW5 Firmware:
  • Download the CM 7.2 – SIII MOD v2 Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the downloaded zip file in your device. Once copied, disconnect the device from the computer.
  • Download the “ROM Manager” app from the Google PLAY Store and install the same. Once installed, open the same and select the option of “Reboot in Recovery Mode” for entering the device in the recovery mode. For manually entering the device in recovery mode, press and hold the Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode.
  • In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the CM 7.2 – SIII MOD v2 Package file which is placed in the phone. Once selected, it will take round about 5 -6 minutes for applying this update.
Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.
Do share with us in the comments section just in case if you face any issues in the comments section as we will try our level best to sort out the same. Congrats, you have now successfully applied the update of CM 7.2 – SIII MOD v2 in your Galaxy ACE S5830.

 

Download and install Update Galaxy Camera with Improvised Jellybean 4.1.2 KSALL4 Firmware

Galaxy Camera Home Screen 
Procedure to Update Galaxy Camera with Jellybean 4.1.2 Firmware:
  • Turn Off your Galaxy Camera so that it can be entered in the Download Mode. Download Mode in Galaxy Camera can be entered by pressing Volume Down + Camera + Power button till you see the Download Mode screen. Just in case if the device boots up in the normal mode, you will have to re try the process of entering the device in the Download Mode.
  • Now, in Odin you need to click on “PDA” to select “I8190XXAMA2_I8190QBLAMA1_HOME.tar.md5” file from the extracted firmware zip file and once it’s done, click on “Start” the process of firmware update. As soon as the firmware is updated successfully, the Galaxy Camera will be rebooted.
  • Once you see the Welcome screen in your Galaxy Camera, you will now need to disconnect the device from the computer and use it the way you want to. To check whether the firmware has been updated or not, you need to check the same from the path “Settings > About Camera” where the firmware version will be mentioned as KSALL4 Jellybean 4.1.2 version.
Tip: Just in a rare case if the device doesn’t boot up or gets into the continuous Boot loop mode, you need to reinsert the battery and boot the device normally. Or else you need to re-apply the update by following the steps above.

Download and install Update Galaxy Y GT-S5363 with Official Value Pack Gingerbread 2.3.6 Firmware

Samsung Galaxy Y Logo 
Procedure to Update Galaxy Y GT-S5363 with Value pack Gingerbread 2.3.6 Firmware:
  • Turn Off your Galaxy Y GT-S5363 so that it can be entered in the Download Mode. Download Mode in Galaxy Y GT-S5363 can be entered by pressing Volume Down + Menu Button + Power button till you see the Download Mode screen. Just in case if the device boots up in the normal mode, you will have to re try the process of entering the device in the Download Mode.
  • Now, in Odin you need to click on “PDA” to select “S5363XXLL1_S5363NEELL1_S5363XXLL1_HOME.tar.md5” file from the extracted firmware zip file and once it’s done, click on “Start” the process of firmware update. As soon as the firmware is updated successfully, the Galaxy Y GT-S5363 will be rebooted.
  • Once you see the Welcome screen in your Galaxy Y GT-S5363, you will now need to disconnect the device from the computer and use it the way you want to. To check whether the firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where the firmware version will be mentioned as XXLL1 Gingerbread Value Pack Firmware.
Tip: Just in a rare case if the device doesn’t boot up or gets into the continuous Boot loop mode, you need to reinsert the battery and boot the device normally. Or else you need to re-apply the update by following the steps above.
Do let us know in the comments section just in case if you face any issues so that we can assist you as soon as possible. Very soon we will be also coming out with ICS firmware update for Galaxy Y GT-S5363.

Download and install Update Galaxy S2 GT I9100 with Jellybean 4.2.1 Firmware Update – Super Stable Resurrection Remix

Video thumbnail for youtube video How to Update Galaxy S2 with S3 Looking Salman ICS 4.0.3 Custom ROM Firmware - Android Advices 
Procedure to Update Galaxy S II GT I9100 phone with Resurrection Remix Firmware:
  • After placing the files in your device, download the “ROM Manager” app from the Google PLAY Store. Now, all you need to do is to disconnect the device from computer and enter your Galaxy S2 in the recovery mode. You can either enter the device in the recovery mode with the help of ROM manager app or manually with the help of below mentioned step.
  • Turn Off your phone so that it can be entered in the download mode. Recovery mode in Galaxy S2 GT I9100 can be entered by pressing Volume Up Key, Center button, and holding both simultaneously press the Power Button after which you will get to see a green robot indicating that the device has entered in the recovery mode.
  • In recovery mode, select “install zip from sd card” and choose the Resurrection Remix Custom ROM firmware and then the Add-On Package. Once the firmware is selected, it will take around 4 -5 minutes for applying the update. Once the firmware is updated successfully, you will see the message as “install from sd card completed” and then all you need to do is to just select “go back” and select “reboot system now” for rebooting the device in the normal mode.
  • To check whether the firmware is updated or not, check from the path “Settings > About Phone” where the current firmware version will be mentioned as Jellybean 4.2.1 Resurrection Remix firmware. Very soon we will be coming up with an article which will help you to upgrade with the latest Jellybean 4.2.1 firmware version for Galaxy S II.
Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.
Do let us know in the comments section just in case if you face any issues in the process of firmware update as we will try our level best to sort out the same at the earliest. So, there you go, you have successfully updated your device with the latest firmware.

Download and install Update Galaxy S Advance I9070 with Official Jellybean 4.1.2 XXLPY Firmware

Galaxy S Advance logo 
Procedure to Update Galaxy S Advance I9070 with Jellybean 4.1.2 Firmware:
  • Download Jellybean 4.1.2 Firmware Package and Odin from here to your computer. Once downloaded, connect your device to the computer and extract both the zip files downloaded in your computer.
  • Open Odin in your computer and you will see that the ID: COM section will turn Yellow indicating that all the drivers are installed successfully.
  • Now, click on “PDA” to select the tar file which you have got after extraction and click on “Start” to start the process of firmware update. As soon as the firmware is updated successfully, you will see that the device will be rebooted automatically. The whole process of firmware update will take around 4 -5 minutes.
  • Once you see the Welcome screen in your Galaxy S Advance I9070, you will now need to disconnect the device from the computer and use it the way you want to. To check whether the firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where the firmware version will be mentioned as XXLPY Jellybean 4.1.2 version.
Note: If the device gets stuck in the Samsung logo or gets into the boot loop mode then you need to long press the power button and turn off the device. Repeat the process from the start by following the instructions.

So there you go, you have now successfully updated your Galaxy S Advance I9070 device with the latest version of Jellybean 4.1.2 firmware. Do let us know just in case if you face any issues while you perform the update in the comments section below as we will try our level best to sort out the same.

Wednesday, January 9, 2013

Download and install Update Galaxy S GT I9000 with Official Jellybean 4.2.1 Firmware

Procedure to Update Galaxy S GT I9000 with Jellybean 4.2 Firmware:
  • Download the Jellybean 4.2.1 Firmware package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and then place these two zip files in your device.
  • Once you have placed these two files, disconnect the device from computer to download the “ROM Manager” app from PLAY Store. Open the app and grant the Superuser access by tapping on the “Grant” option.
  • Now, from the ROM Manager app, select “Enter into Recovery Mode” for booting the device in the recovery mode or else you can also manually enter the device in the recovery mode by first turning Off the device. Recovery mode in Galaxy S GT I9000 can be entered manually by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.
  • Now, select “install zip from sd card” to choose the placed jellybean 4.2.1 Zip Package and Google Apps Package. It will take around 3 – 5 minutes for applying the update. Please note that sometimes it may take more than expected time for updating the same.
  • Now, once the firmware is updated, select “go back” and select “reboot system now”. To check on whether the firmware is updated or not, head over to the path “Settings > About Phone” for checking the same.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Download and install Update Galaxy S Advance I9070 with Jellybean 4.1.1 Firmware

Galaxy S Advance logo 
Procedure to Update Galaxy S Advance I9070 with Jellybean 4.1 Styled Firmware:
  • Once placed, disconnect the device and download the ROM Manager app from the Google PLAY Store so that you can then enter the device in the recovery mode. Alternatively, you can also enter your phone in the recovery mode with the help of below mentioned manual step.
  • Recovery mode in Galaxy S Advance I9070 can be entered manually by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.
Note: If the device gets stuck in the Samsung logo or gets into the boot loop mode then you need to long press the power button and turn off the device. Repeat the process from the start by following the instructions.

Download and install Update Galaxy Note N7000 with Official Jellybean 4.1.2 XXLSA Firmware

Jellybean 4.1.2 Logo 
Procedure to Update Galaxy Note N7000 with Jellybean 4.1.2 XXLSA Firmware:
  • Download XXLSA Jellybean 4.1.2 Firmware Package from here to your computer along with Odin in your computer. Once downloaded extract both of them preferably to the folders on Desktop. Once extracted, open odin in your computer and turn off your Galaxy Note so that it can be entered in the Download Mode.
  • The download mode can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. Just in case if the device turns ON in the normal mode, you will have to again retry entering the device in the download mode.
  • Connect your phone to computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow which will mean that all the drivers have been installed successfully and you are ready to proceed to the next step wherein you will have to click on the below mentioned corresponding tabs to select the file from extracted firmware package.
PDA – CODE_N7000XXLSA_549786_REV02_user_low_ship.tar.md5,
Phone – MODEM_N7000XXLSA_REV_05_CL1222228.tar.md5,
CSC – CSC_OXA_N7000OXALSA_549786_REV02_user_low_ship.tar .md5
  • Make sure that Re-Partition option is unticked and nothing should be added in the PIT section. Once you are done with all the above mentioned selections, you can now head over to the next step wherein you need to click on “Start” to start the process of firmware update.
  • It will take around 3 -4 minutes for applying the firmware, once the firmware is updated successfully you will see that device will be rebooting on its own.
  • To check on whether the firmware is updated or not, head over to the path “Settings > About Phone” for checking the same where you will see the version details as XXLSA Jellybean 4.1.2 firmware.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install Galaxy S GT I9000 with Stable Jellybean 4.2.1 Firmware


Procedure to Update Samsung Galaxy S GT I9000 with C-RoM Mix v5.0 Jellybean 4.2.1 firmware:
  • Download the C-RoM Mix 4.2.1 firmware package from here to your computer. Once downloaded, connect your Galaxy S GT I9000 to the computer with the help of original USB cable and place the zip file into the sd card. Ensure that you are not placing the files deep into the sub folders.
  • Recovery mode in Galaxy S GT I9000 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.
  • Now, in the recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the C-RoM Mix v5.0 firmware  Package. It will take around 4 -5 minutes for applying the update.
  • Once you see the “install from sd card complete” message on screen, select “Go Back” and select “reboot system now” for rebooting the device in the normal mode.
  • To check on whether the C-RoM Mix v5.0 firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where you will find the firmware version.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully learnt to update your Galaxy S with C-RoM Mix v5.0 firmware, in the coming days to come we will come with new custom Jellybean 4.2 firmwares for Galaxy S devices.

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | belt buckles
Design Downloaded from Free Blogger Templates | Free Website Templates