1:44 PM
samsungapps
Procedure to Update AOKP 3 Firmware Update in Galaxy S2 and in Galaxy S3 Device:
- Download the below mentioned corresponding firmware from here to your computer and Google Apps package. Once downloaded, you will have to connect the phone to the computer and place these two files in your device. Kindly select the appropriate file for your Galaxy Smartphone or else it may even brick the phone.
- Once you have placed the file in your phone, turn off the device so that it can be entered in the recovery mode.
- Recovery mode in your Galaxy S2 or S3 device can be entered by holding the Volume Up button + the Home key button (the middle button). In recovery mode, select Clear cache and wipe all the data present in your phone so as to make sure that there are no force close errors after applying this update.
- In recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the placed AOKP Firmware Package. Once the file selection is over, the firmware will be applied within 10 minutes, you can see the progress of firmware update with the help of a progress bar. As soon as you see the home screen, select “Go Back” to select the option of “reboot system now” for rebooting the device in the normal mode.
Note: Just in a rare case if your Samsung Galaxy S III refuses to turn ON or say if it gets stuck on the Samsung Galaxy Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.
So there you go, you have now successfully updated your device with
this AOKP 3 firmware. Do share with us in the comments section just in
case if you face any issues as we will try to address the same.
0 yorum:
Post a Comment